| Product Specifiation |
|
| Product Picture |
Item No:PVDF Hollow fiber-SNU-O |
|
1.Model:PVDF
2.Appearance: 3.Pore size:0.1Micron
4.inner diameter:0.7mm
5.OD(outer diameter):1.3mm
6.Breaking point pressure MPa > 0.50 (alcohol)
7.Test moisture content:≤10%
8.Initial water flux of single filament:≤500L/㎡.h
9.Tensile strength at break (N) > 3.3
10.Elongation (%) > 160 11.nitial bubble point pressure MPa > 0.25
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Packing : |
1.In 2.CBM: 3.N/G weight
|
Operation Guide
During the operation of the UF system, it is necessary to avoid sudden changes in pressure during system start-up, shutdown, operation, cleaning, maintenance, etc., as well as exceeding the maximum withstand pressure specified in this manual, to prevent possible membrane breakage, sealing, etc. End fall off, membrane shell cracking and other serious damage consequences; this series of products have been treated with anti-corrosion and membrane wire protection before leaving the factory, and the inner membrane wire of the module is in a semi-dry state. For manual operation, the water production rate should be set to 50% of the design water production rate, and the initial water production must be discharged directly and cannot be used as product water.
Product usage tips
The normal start-up and normal cleaning and maintenance of the UF system are the key to ensure the long-term normal use of membrane products. Before starting the system, it should be ensured that the parameters of each valve, instrument, pre-processing equipment, signal transmission equipment, power equipment, etc. meet the design specifications and requirements, so as to ensure the safe, stable and up-to-standard operation of the overall system. Please refer to the product technical manual for the debugging and testing work of the system in the early stage.
Product Tags:
|
|
Industrial Hollow Fiber MBR Membrane 0.7mm Diameter Polyacrylonitrile Membrane Images
|
